Watertight Shower Tile Installation for Greater Fort Wayne Homes
We build showers from the waterproofing out, with properly sloped pans, sealed niches and benches, and wall tile set straight from the floor to the ceiling.
SHOWER TILE
What Is Included in a Shower Tile Installation With Perez Constructions?
A shower tile installation with Perez Constructions includes removing the old surround, preparing walls and floor, installing a waterproofing system, building the shower pan, framing niches and benches, and setting and grouting the tile. We treat waterproofing as the most important layer, because tile and grout alone do not keep water out.
Based in Hudson, Indiana, we tile showers for homeowners throughout Greater Fort Wayne, Indiana and nearby Northeast Indiana communities. Many of the shower problems we see, from soft drywall to stained ceilings below, come from shortcuts behind the tile. We use proven waterproofing methods, slope the pan correctly toward the drain, and pay close attention to corners, seams, valves and niche edges where leaks usually start. Then we set the tile with clean lines and even joints, so the shower looks as good as it performs. You will know exactly what goes into every layer before we start.
✓ Full waterproofing behind the tile
✓ Pans sloped correctly to the drain
✓ Built-in niches for storage
✓ Shower benches and corner seats
✓ Wall tile set floor to ceiling
✓ Clean edges, corners and transitions
LOCALLY OWNED
Hudson & Fort Wayne, IN
SHOWER TILE WORK
Showers Built to Keep Water Where It Belongs
A tiled shower is really a system. The waterproofing, the pan, the slope, the niches and the tile all have to work together, and a weakness in any one of them can lead to hidden damage. We build each layer with care and check it before the next one covers it up. Whether you want a new walk-in shower, a tub-to-shower conversion or a refreshed tile surround, we plan the details with you, from niche placement and bench height to tile pattern, grout color and trim.
Waterproofing Systems
We install sheet or liquid-applied waterproofing membranes over the shower walls and floor, sealing seams, corners and pipe penetrations so water cannot reach the framing behind the tile.
Shower Pans & Slope
We build mortar beds or install pre-sloped pan systems that direct water steadily toward the drain, with linear or center drains depending on the design you choose.
Recessed Niches
Built-in niches give you storage without a cluttered ledge. We frame, waterproof and tile them with sloped bottoms and finished edges, sized to fit your bottles and lined up with the tile.
Shower Benches
We build seated and corner benches with proper support, waterproof them as part of the shower system, and slope the top so water drains off rather than standing on the surface.
Shower Wall Tile
We set shower wall tile from floor to ceiling or to your chosen height, keeping joints aligned around valves and niches and balancing cuts at corners and the shower entry.
Grout, Trim & Sealant
We grout with products suited to wet areas, install edge trim, seal changes of plane with the right flexible sealant, and leave the opening ready for a shower door or glass panel.
How Your Shower Tile Project Comes Together, Layer by Layer
A good shower depends on getting each hidden layer right before it is covered. Our process keeps the work in the proper order, builds in time for testing and curing, and keeps you informed about what is happening inside your walls.
01
Consultation & Design
We look at your existing shower, talk about size, niche and bench placement, tile choices and drain options, and explain what the walls and floor will need.
02
Demolition & Prep
We protect the bathroom and nearby rooms, remove the old surround and pan, check framing and plumbing access, and repair anything that is damaged before rebuilding.
03
Pan & Framing
We frame niches and benches, set backer board, and build or install a pan that slopes evenly toward the drain from every corner of the shower floor.
04
Waterproofing & Testing
We apply the waterproofing system across walls, floor, niches and bench, seal every seam and penetration, and flood test the pan where the system calls for it.
05
Tile & Grout
We set the wall and floor tile, align joints around valves and niches, then grout, trim edges and seal corners with a flexible sealant made for showers.
06
Final Walkthrough
We clean the shower, walk through the finished work with you, explain cure times before first use, and share care tips that keep grout and tile looking fresh.
DETAIL FOCUSED
How it works
Ready to Rebuild Your Shower in Greater Fort Wayne?
Shower work is where honesty matters most, because so much of it ends up hidden behind tile. With Perez Constructions, you know what we are installing and why. If removing the old surround reveals damaged framing or signs of old leaks, we show you, explain your options and agree on next steps before continuing. We keep the bathroom protected and the work area tidy, communicate clearly at each stage, and take the time to get corners, seams and slopes right. We hold ourselves accountable for every layer we build.
A shower you can trust starts behind the tile, with waterproofing and slope done properly, and finishes with tile work you enjoy seeing every morning. As a locally owned remodeling company in Hudson, Indiana with 5+ years of hands-on experience, we bring that care to shower projects throughout Greater Fort Wayne, Indiana and nearby communities. Whether you want a new walk-in shower, a rebuilt surround or a shower with a bench and niches, we will plan it with you and build it right. To get started, call us or fill out our contact form.
How Do You Keep a Tiled Shower Watertight for the Long Run?
A tiled shower stays watertight when a proper waterproofing layer sits behind the tile, the pan slopes evenly to the drain, and every corner, niche and valve opening is sealed. Tile and grout alone are not waterproof. Careful waterproofing is what protects the walls and framing in Greater Fort Wayne, Indiana bathrooms.
Most shower failures we see trace back to what was hidden behind the tile, not the tile itself. Planning the layout, niches and benches before work begins also keeps the finished shower practical and easy to clean.
Steps in a Shower Tile Project
- Tear out to the studs. Old tile and backer are removed so we can inspect the framing and look for past water damage.
- Correct the framing and pan. Walls are made plumb and the shower pan is built to slope to the drain.
- Install backer and waterproofing. Cement board or foam panels go up, then a waterproof membrane covers seams, corners and openings.
- Plan the tile layout. Niches, benches and grout lines are planned so cuts look intentional.
- Set and grout. Wall and floor tile is set level and grouted with a product suited to wet areas.
- Seal and finish. Change-of-plane joints are caulked, fixtures are trimmed out and grout is sealed where needed.
Choices That Shape Your Shower
- Tile size. Large tiles mean fewer grout lines on walls, while small tiles grip better on the shower floor.
- Niches and benches. Built-in storage and seating need waterproofing planned from the start.
- Grout type. Some grouts resist stains and moisture better, which helps in busy family bathrooms.
- Glass or curtain. A glass enclosure shows off tile work but needs precise wall and curb measurements.
A new shower is often the centerpiece of a bathroom remodeling project, and our tile installation work can carry the same design onto the floor and walls. To plan your shower, call us or fill out our contact form.
Common questions
Frequently Asked Questions
Here are answers to the questions we hear most about shower tile, waterproofing, pans, niches and benches. If you have a question about your own shower, our contact form is the easiest way to reach us.
Why is waterproofing so important in a tiled shower?
Tile and grout are not waterproof on their own. Grout absorbs water, and over time moisture can pass through to the wall and floor behind it. A proper waterproofing system keeps that water from reaching the framing, drywall and subfloor, which helps prevent mold, rot and damage to rooms below. It is the most important part of any tiled shower.
Can you add a niche or bench to my shower?
Yes. Niches and benches are some of the most requested shower features. Niches are usually framed between wall studs, so we check framing and plumbing locations to find the best spot. Benches can be built in or added as a corner seat. Both are waterproofed as part of the shower system and sloped so water drains off.
What kind of shower pan do you install?
It depends on your shower layout, the drain type and the waterproofing system. We build traditional sloped mortar beds and also install pre-sloped pan systems that work with a sheet membrane. Each option can perform well when installed correctly. We explain the differences and recommend the pan that fits your design, budget and existing floor structure.
How much does shower tile installation cost?
Cost depends on the size of the shower, the tile you choose, the number of niches or benches, the waterproofing system, and what we find once the old surround comes out. A simple surround and a fully custom walk-in shower are very different projects. We visit, measure and assess the space, then provide a clear written estimate.
How long does it take to tile a shower?
A shower tile project usually takes longer than people expect, because waterproofing, mortar beds and grout each need time to cure. Testing the pan adds time too. Most projects take a week or more depending on size and complexity. We give you a realistic timeline up front and keep you updated as each layer is completed.
Can you retile a shower without replacing everything behind it?
Sometimes the tile can be replaced while keeping existing backer board, but only if the waterproofing behind it is sound, and that is hard to confirm on an older shower. In many cases, a full tear-out is the safer choice. We look at your shower and its condition and explain the options honestly. Reach out through our contact form to set up a visit.